Environment Control Systems

COOL-1:

Sometimes you just need a simple and inexpensive device to control the temperature of an area. That device is the COOL-1 thermostat. Any cooling device that operates on 120 volts and is 15-amps or less can be plugged into the COOL-1. Once connected to the COOL-1, the device is turned ON & OFF when the temperature changes.

*THIS PRODUCT REQUIRES 1-2 EXTRA DAYS TO BE PROCESSED*

THE EVC-1:

The EVC-1 provides extreme flexibility in a reliable solid-state environmental controller. Selectable CO2, Temperature and Humidity modes allow the user to control temperature & humidity separately or together. Built in photocell activates CO2 device during the day. Night device outlet can control an exhaust fan / sulfur burner etc.

* THIS PRODUCT REQUIRES 1-2 EXTRA DAYS TO BE PROCESSED*

HPH-4

When trying to control more than one HID lighting system, you can either use a bunch of timers OR the HPH-4. The HPH-4 makes it simple to control up to 4000 watts of lighting from a single timer or controller. The HPH-4 has FOUR UNIVERSAL receptacles that accept either a 120-volt or 240-volt male plugs from your HID ballasts. 30-amps @ 120 / 240-volt

*THIS PRODUCT REQUIRES 1 -2 EXTRA DAYS TO BE PROCESSED*

MDT-1:

The MDT-1 is a 100% DIGITAL Lighting & recycling timer.

* Coordinates 2 main timing functions in one convenient package. * Control lighting schedules with 24-hour time clock. * Integrated digital recycling timer can operate daytime, night time or 24 hours a day. * Digital recycling ON & OFF times can be pro grammed in hours, minutes and seconds. * HI-Temp shutdown feature allows the user to set a maximum temperature. In the event of overheating, the MDT-1 will shut off the lighting. If overheating event happens, the unit logs the max temperature and the time it occurred. * Hot start prevention monitors the incoming power and will disable the HID lights in the event of a power failure. After a user selectable delay, the HID lamps are permitted to re-start. * MDT-1 also features 15 amp resettable circuit breaker.

*THIS PRODUCT REQUIRES 1-2 EXTRA DAYS TO BE PROCESSED*

When you need to control larger equipment with higher amperage, or when you need to increase the number or size of the lights, fans, air conditioners or pumps in your growing area... The PXM-1 (15 amp@120vac) or PXM-2 (15 amp@ 240vac) is the answer

The PXM ia available in 2 models, the PXM-1 has 120-volt receptacles and the PXM-2 has 240-volt receptacles

Allows large devices up to 15 amps to be controlled

Install the pre-wired "trigger" cable into any controller or timer that is 120 volt.

Connect HID light fixtures. The PXM-1 allows you to connect two (2) 600 watt HID lights, the PXM-2 allows you to connect two (2) 1000 watt HID lights

Main Power: PXM-1 has 15 amp@120vac and PXM-2 has 15 amp@ 240vac

*THIS PRODUCT REQUIRES 1-2 EXTRA DAYS TO BE PROCESSED*

VCG-27 / LP:

VCG-27 NG comes complete with (10) clean burning brass burners pre-installed that produce from 6 up to 27 cubic feet / hr of CO2. Two selector valves make setting the output easy. Electronic ignition standard, tip-over switch standard, dual redundant solenoids standard, peace of mind STANDARD. Comes with the appropriate regulator & 10 foot hose.

*THIS PRODUCT REQUIRES 1-2 EXTRA DAYS TO BE PROCESSED*

VCG-6 / NG:

VCG-6 NG comes complete with (2) clean burning brass burners pre-installed that produce up to 6 cubic feet / hr of CO2. Electronic ignition standard, tip-over switch standard, dual redundant solenoids standard, peace of mind STANDARD. Comes with the appropriate regulator & 10 foot hose.

*THIS PRODUCT REQUIRES 1-2 EXTRA DAYS TO BE PROCESSED*

VCG-6 / LP:

VCG-6 LP comes complete with (2) clean burning brass burners pre-installed that produce up to 6 cubic feet / hr of CO2. Electronic ignition standard, tip-over switch standard, dual redundant solenoids standard, peace of mind STANDARD. Comes with the appropriate regulator & 10 foot hose.

*THIS PRODUCT REQUIRES 1-2 EXTRA DAYS TO BE PROCESSED*